2013-2015 Acura RDX 3.5L Used Engine
*Image for illustrative purposes only.

13 FORD MUSTANG GEN 1 COYOTE 5.0L MT82 6 SPEED MANUAL 50K MILES DROP OUT SWAP

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

13 FORD MUSTANG GEN 1 COYOTE 5.0L MT82 6 SPEED MANUAL 50K MILES DROP OUT SWAP For Sale

It is easy to locate an great second hand Ford motor for sale at Used Engine Finder. To be able to obtain the finest bargain on the best substitute engine for your requirements, we make it easy for you to contact a group of Ford engine importers & junk yards instantly.

With Used Engine Finder, you needn’t lose time shopping around. We only need information about what exactly you need, and our scrap yardswill get back to you with quotes. You can be sure you’re receiving the best price since we work directly with them.


So don’t waste any more time and utilize Used Engine Finder to discover the perfect engine for your Ford.

  • When searching for a better engine, save time and also money by utilizing Used Engine Finder.
  • Obtain deals from several of our honest engine suppliers.
  • The greatest deals may be acquired by working direct with engine sellers.
  • Find engines for any and all automobiles, no matter model.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.
Warranty Info
Review our Warranty, Return & Exchange policies before ordering. Standard Warranty: 30 days parts replacement. Extended Warranty: Optional 90 days. No labor costs covered. Defective parts may be replaced or refunded. Read more.