2014-2015 Acura MDX 3.5L Used Engine
*Image for illustrative purposes only.

2013-16 BMW 328i 320i Engine 2.0L 4 Cylinder Gas RWD N20 95K OEM

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

2013-16 BMW 328i 320i Engine 2.0L 4 Cylinder Gas RWD N20 95K OEM For Sale

Used Engine Finder is the greatest location to locate a high-quality 2nd hand BMW motor for sale. To be able to obtain the finest bargain on the ideal substitute motor for your requirements, we allow you to contact a community of BMW engine importers & salvage yards instantly.

Trying hard to find an engine is not necessary thanks to Used Engine Finder. We just need information about what you need, and our scrap yardswill get back to you with quotes. And since we deal directly with them, you can be certain you’re obtaining the best possible price.


Search for your best BMW engine using Used Engine Finder right now!

  • When searching for a substitute motor, save time and also money through the use of Used Engine Finder.
  • Get numerous quotes from our dependable traders.
  • By negotiating direct with engine manufacturers, you can be certain you’re getting the best price possible.
  • Save Time With Making Just One Inquiry
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.