2014-2015 Acura ILX 2.0L Used Engine
*Image for illustrative purposes only.

BMW M73 Engine

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

Enquire Now

BMW M73 Engine For Sale

This engine replaced the previous M70 unit, also split into 12 V- cylinders.

However, there were notable differences with the previous unit, since first of all the construction technology changed, which uses electrochemically treated alusil for the monobloc, in order to obtain silicon barrels. The two heads are in aluminum alloy.

The bore and stroke measurements also change, 85×79 mm. The overall displacement is thus increased to 5379 cm³. The electronic control unit is also different, again a Bosch, but this time a Motronic M5.2 instead of the previous LH-Jetronic. In some versions, however, there were two control units, one per bank.

Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.
Warranty Info
Review our Warranty, Return & Exchange policies before ordering. Standard Warranty: 30 days parts replacement. Extended Warranty: Optional 90 days. No labor costs covered. Defective parts may be replaced or refunded. Read more.