2014-2015 Acura ILX Hybrid 1.5L Used Engine
*Image for illustrative purposes only.

Engine 6.8L VIN S 8th Digit 10-415 Fits 00-01 EXCURSION 566340

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

Engine 6.8L VIN S 8th Digit 10-415 Fits 00-01 EXCURSION 566340 For Sale

Used Engine Finder is the greatest place to discover a high-quality Ford motor for sale. We allow you to instantly contact a a community of Ford junkyards and engine importers, so that you can find a very good bargain on the most suitable used motor for your needs.

With Used Engine Finder, there’s no need to waste time searching. We only require information about what exactly you need, and our supplierswill get back to you with quotes. And since we deal directly with them, you can be sure you’re obtaining the best possible price.


Look for your best Ford engine using Used Engine Finder now!

  • When looking for a replacement motor, save time and money through the use of Used Engine Finder.
  • Get numerous bids from our trustworthy sellers.
  • By negotiating direct with engine manufacturers, you can be certain you’re receiving the lowest price achievable.
  • You may find engines for just about any and all cars here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.