2014-2015 Acura MDX 3.5L Used Engine
*Image for illustrative purposes only.

Honda Pilot 3.5L Engine 83K Miles 2009 2010 2011

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

Honda Pilot 3.5L Engine 83K Miles 2009 2010 2011 For Sale

If you happen to be in the marketplace for finding a quality second hand Honda engine for sale, simply visit Used Engine Finder. To be able to get the best bargain on the ideal substitute motor for your needs, we allow you to contact a group of Honda engine importers & junk yards quickly.

You needn’t spend time comparing prices when you have Used Engine Finder at your disposal. We just require information about what you need, and our junk yardswill respond with prices. Our direct connection with the vendor ensures that we are able to provide you with the ideal prices.


Look for your best Honda engine using Used Engine Finder now!

  • When searching for an alternative engine, save time as well as money through the use of Used Engine Finder.
  • Get many quotes from our reputable junkyards.
  • The best deals may be acquired by dealing directly with engine sellers.
  • You may find engines for just about any and all automobiles here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.