2009-2014 Acura TL 3.5L Used Engine
*Image for illustrative purposes only.

JDM 08 09 Subaru Tribeca 10 11 Legacy Outback EZ36D V6 3.6L Engine H6 Motor 45K

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

JDM 08 09 Subaru Tribeca 10 11 Legacy Outback EZ36D V6 3.6L Engine H6 Motor 45K For Sale

Used Engine Finder is the best place to locate a high-quality 2nd hand Subaru motor for sale. We let you instantaneously contact a a community of Subaru autowreckers and engine importers, so you can find the best bargain for the most suitable used engine for your needs.

With Used Engine Finder, there’s no need to spend time searching. We just need details about what exactly you need, and our salvage yardswill get back to you with quotes. You can be certain you’re getting the best price since we deal directly with them.


So do not delay any longer, find your perfect engine right now together with Used Engine Finder.

  • When searching for a better motor, save time and money through the use of Used Engine Finder.
  • Obtain numerous estimates from our honest shops.
  • By negotiating directly with engine manufacturers, you can be sure you’re receiving the best price feasible.
  • Save Time With Making Just One Inquiry
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.
Warranty Info
Review our Warranty, Return & Exchange policies before ordering. Standard Warranty: 30 days parts replacement. Extended Warranty: Optional 90 days. No labor costs covered. Defective parts may be replaced or refunded. Read more.