2009-2014 Acura TL 3.5L Used Engine
*Image for illustrative purposes only.

Land Rover Discovery 2 99-02 Complete Engine 4.0 Bosch Motor 124K Miles

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

Land Rover Discovery 2 99-02 Complete Engine 4.0 Bosch Motor 124K Miles For Sale

If you happen to be in the market for getting a top notch second-hand Land Rover motor for sale, simply visit Used Engine Finder. To be able to receive the finest bargain on the ideal used engine for your requirements, we allow you to reach out to a group of Land Rover engine importers & junk yards promptly.

With Used Engine Finder, you don’t need to lose time doing your research. We only need information about what you need, and our engine supplierswill respond with quotations. And since we deal directly with them, you can be sure you’re getting the very best price.


So don’t waste any more time and make use of Used Engine Finder to discover the ideal engine for your Land Rover.

  • When searching for a better engine, save time and also money through the use of Used Engine Finder.
  • Get quotes from several of our dependable engine suppliers.
  • The best prices may be obtained by working directly with engine retailers.
  • Discover motors for all models and makes of autos.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.