2013-2015 Acura RDX 3.5L Used Engine
*Image for illustrative purposes only.

Motor ELANTRA 2013 Engine 4055333

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

Motor ELANTRA 2013 Engine 4055333 For Sale

If you happen to be in the marketplace for locating a good used Hyundai motor for sale, look no further than Used Engine Finder. To be able to get the best price on the best substitute engine for your requirements, we make it possible for you to reach out to a community of Hyundai engine importers & salvage yards promptly.

There’s no need to spend time looking around when you have Used Engine Finder available. Just tell us what you’re looking for and our junk yards will reply with several quotations. Our direct connection with the supplier makes sure that we are able to provide you with the best possible pricing.


So don’t waste any more time and utilize Used Engine Finder to find the best engine for your Hyundai.

  • When looking for a substitute motor, save time as well as money through the use of Used Engine Finder.
  • Obtain several quotes from our dependable traders.
  • The greatest deals may be obtained by dealing direct with engine suppliers.
  • Locate motors for all makes and models of autos.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.